Gear Train for 2001 Chrysler Concorde
Fwd. Used with the 3 pinion carrier. Front Planet Pinion Carrier, Thrust (Not Shown). Input Clutch Hub, Thrust. Number One Caged Needle Bearing.
Fwd. [2nd & 4th] Clutch Piston,Outer & Inner Seal, [150 MM O.D.]. Low and Reverse Clutch Piston. Low & Reverse Clutch Piston, Inner 3-3/8`` O.D., Outer 6`` O.D.
Fwd. Up to 1/27/2003. Use with Transmission Assembly 52852903AA. Use with Transmission Assembly 52852904AA.
Clutch Retainer Gasket
CLUTCH RETAINER GASKET W IS
Front Planet Pinion Carrier. Fwd. Support to Input Clutch Hub, Needle Thrust.
Rear Sun Gear Thrust Bearing
Front. Fwd.
Fwd. Low & Reverse Clutch. Lowith reverse transmission.
Fwd. Includes Piston, Retainer & Seals. Includes Piston, Seal and Retainer.
Fwd. [2nd & 4th] Clutch Piston, Inner & Outer Seal, [145 MM O.D.]. 2nd & 4th Clutch Piston, Inner and Outer Seal, 145mm O.D. 2nd & 4th Clutch Piston, Outer and Inner Seal, 150 mm O.D,.
Use after Build Date 04/28/2008. Use Before Build Date 04/28/2008.
Fwd. [5.49 - 5.75 MM] Thick. 2nd & 4th Clutch. Reverse Clutch Reaction. [2.02-2.07 mm].
[2.58mm to 2.65mm]. 2.03 - 2.10mm. 2.58-2.65mm Thk. [2.58/2.65] mm. [2.36/2.43mm].
Fwd. 2.27-2.32mm. [2.27-2.32]MM. 2.27-2.32mm. [2.27 - 2.32MM] Thick.
[2.91mm to 2.98mm]. 2.58-2.65mm Thick. 2.79-3.01mm. [2.91/2.98] mm. 2.91 - 2.98mm].
[1.81mm to 1.88mm]. 2.25 - 2.32mm. 1.69-1.91mm. [1.81/1.88] mm. [1.81/1.88mm]. [1.81/.188mm].
[1.92mm to 1.99mm]. [1.90/1.99mm]. 1.70 - 1.77mm. [1.92/1.99] mm. [1.92/1.99mm].
Fwd. 2.02-2.07mm. [2.02-2.07]MM. 2.02-2.07mm. [2.02 - 2.07MM] Thick.
[2.52/2.32 mm]. [2.25mm to 2.32mm]. [2.22/2.32mm]. 2.47 - 2.54mm. 2.13-2.35mm. 2.25-2.32mm Thk. [2.25/2.32] mm.
[1.97/2.08 mm]. [2.03mm to 2.10mm]. 2.36 - 2.43mm. 1.91-2.13mm. 2.03-2.10mm Thk. [2.03/2.10] mm.
[1.70mm to 1.77mm]. 1.59 - 1.66mm. 1.70-1.77mm Thk. [1.70/1.77] mm.
[2.69mm to 2.72mm]. [2.69/2.72mm]. 2.57-2.79mm. 2.58-2.65mm Thick. [2.69/2.76] mm. 2.69/2.76mm].
[2.14/2.99mm]. [2.14mm to 2.21mm]. 1.81 - 1.88mm. 2.14-2.21mm Thk. [2.24/2.21 mm]. [2.14/2.21] mm. [2.14/2.29mm]. [1.92/1.99mm].
[2.36mm to 2.43mm]. 1.92 - 1.99mm. 2.36-2.43mm Thk. [2.36/2.46 mm]. [2.14/2.21mm]. [2.36/2.43 mm.
Fwd. Used with the 3 pinion carrier. Front Planet Pinion Carrier, Thrust (Not Shown). Input Clutch Hub, Thrust. Number One Caged Needle Bearing.
Fwd. With Shart and Thrust Washer. With Shaft & Thrust Washer, UnderDrive Clutch. With Shaft & Thrust Washer, Under Drive Clutch.
Fwd. Reverse & Over Drive Clutch Pressure Plate, Wave. Rev.& OverDrive Clutch Pressure Plate, Wave. Peverse & Overdrive Clutch Pressure Plate, Wave. Reverse & Overdrive Clutch Preassure Plate, Wave.
Pressure Plate. Fwd. Reverse Over Drive Clutch. Reverse & Overdrive Clutch.
Fwd. Reverse & Over Drive Preassure Plate, Flat. Rev. & OverDrive Pressure Plate, Flat. Reverse & Overdrive Preassure Plate, Flat.
Fwd. [5.49 - 5.75 MM] Thick. 2nd & 4th Clutch. Reverse Clutch Reaction. [2.02-2.07 mm].
Fwd. Also Avalable In Overhaul Package. Also Avalable In Overhaul Packge. Also Available in Overhaul Package.
Fwd. Also Avalable In Overhaul Package. Also Avalable In Overhaul Packge. Also Available in Overhaul Package.
Front Planet Pinion Carrier. Fwd. Support to Input Clutch Hub, Needle Thrust.
Fwd. Input Clutch Hub, Large, Front Blue, .103`` Thick. [M61.08 C/S 2.70] / Transmission Input Clutch To Retainer.
Fwd. Input Clutch Hub, Red, .106`. Input Clutch Hub, Small, Rear Red .103`` Thick. [ID=M57.85 THK=2.258] / Transmission Input Clutch To Retainer.
Fwd. Input Shaft. UnderDrive Piston, Inner, 45mm O.D. Intermidiate Shaft Retaining.
Fwd. Reverse & OverDrive Clutch Piston, Inner. Transmission. [OD=M78.91 THK=2.70].
Fwd. Reverse and Overdrive Piston, Outer 160mm. Input Clutch, Outer, 160mm O.D. Reverse & OverDrive Piston, Outer, 160mm O.D,.